QuikPoint Drill-Mate Mortar Gun – Faster, Cleaner Masonry Tool

If you’ve ever spent an afternoon tuck-pointing by hand, you know the feeling — sore wrists, cramped fingers, and mortar everywhere except where it’s supposed to be.
Masonry work is rewarding, sure, but it’s also time-consuming and tough on the body.

That’s exactly why the QuikPoint Drill-Mate Mortar Gun has earned such a reputation among masons, restoration crews, and stone installers. It’s one of those rare tools that doesn’t just make the job easier — it changes the way you work.

The Basics: What It Is and How It Works

The QuikPoint Drill-Mate is a powered mortar pointing system that attaches to any 3/8″ variable-speed drill, whether corded or cordless.

Once connected, your drill becomes the motor that drives the internal auger, which pushes mortar from the hopper directly through the nozzle.
The result? Smooth, consistent mortar application without the constant squeezing, scraping, or hand fatigue of traditional pointing bags.

You load the hopper, pull the trigger, and let the tool do the hard work — fast, clean, and with precision.

Why It’s So Much Faster

Here’s where the QuikPoint earns its “game-changer” status:
It’s up to five times faster than traditional pointing methods.

The auger-drive system feeds mortar evenly, eliminating air pockets and the stop-start rhythm that slows down manual application.
With a 3-quart hopper, you can work longer between refills, and the interchangeable steel nozzles let you switch easily between different joint sizes and materials.

It’s like going from hand-whisking pancake batter to using a mixer — same process, but exponentially more efficient.

For professionals doing hundreds of linear feet of joints a day, that time adds up to huge productivity gains.

Build Quality You Can Feel

One thing you notice immediately when you pick up the Drill-Mate is that it’s built like a worksite tool, not a cheap accessory.
The body and fittings are tough, durable, and ready for real-world abuse.

The auger system inside is designed to handle standard mortars, grouts, and adhesives without clogging or jamming. The steel nozzles thread on easily and clean up fast — a blessing after a long day on site.

It’s not a disposable gadget; it’s a professional-grade piece of gear that holds up through hundreds of jobs.

Who Benefits Most from the Drill-Mate

This tool isn’t just for one type of mason — it’s built for anyone who applies mortar regularly, including:

Tuck-pointers: It’s perfect for restoration and repair work, delivering consistent fill deep into narrow joints without messy overflow.

Thin-brick installers: When you’re laying veneers or doing interior brick walls, the Drill-Mate gives you a clean, even bead that reduces smearing and cleanup.

Stone cladding crews: Natural and cultured stone both benefit from fast, controlled mortar delivery, especially when working on vertical surfaces.

Glass-block specialists: It handles mortar and sealant application smoothly, giving uniform joints and minimizing gaps or bubbles.

Anyone who values speed, precision, and cleanliness in their work will appreciate what this tool brings to the job.

Corded or Cordless — Your Choice

One of the smartest design decisions is that it mounts directly to any 3/8″ variable-speed drill.
That gives you total flexibility — use your favorite corded drill for long shifts, or go cordless when working off scaffolding or away from outlets.

No special motor, no complicated setup. Just attach, load, and go.

That also means if your drill ever wears out, the QuikPoint lives on. You’re not tied to proprietary batteries or motors.

Cleaner, Smarter, Less Waste

If you’ve ever used a grout bag, you know how wasteful the process can be. Half your mix ends up on the ground, drying before you can use it.

The QuikPoint’s auger-fed design applies just the right amount of mortar every time — directly into the joint, with minimal excess. That means less cleanup, less waste, and a neater finish.

Crews who’ve switched to the Drill-Mate often report cleaner lines and more consistent joints — not to mention happier laborers who aren’t spending hours cleaning tools afterward.

A Real-World Upgrade for Real Jobs

Talk to anyone who’s used the QuikPoint Drill-Mate for a few weeks, and you’ll hear the same thing:
They can’t imagine going back to old-school pointing.

It’s one of those tools that pays for itself quickly — not because it’s flashy, but because it works every single time. Whether you’re doing detailed restoration on a historic building or cranking through a new construction project, the speed and control it offers are hard to beat.

It’s not just a productivity tool — it’s a job-saver.

Final Thoughts

In masonry, efficiency and precision go hand-in-hand. The QuikPoint Drill-Mate Mortar Gun delivers both in spades.

By turning a regular drill into a powered mortar applicator, it gives you control, speed, and consistency that manual methods simply can’t match. Add in its rugged construction, easy-clean design, and compatibility with a wide range of drills, and it’s easy to see why so many professionals are calling it indispensable.

Whether you’re a tuck-pointer, thin-brick installer, or stone cladding specialist, this is the tool that takes the strain out of the job — and puts the focus back on craftsmanship.